BMW E46 Pre-Facelift Headlight Duct
3D Printed headlight duct for the Pre-Facelift BMW E46.
This headlight duct gives a direct cold air feed into the engine bay making it an ideal source of cold air for an intake system and is printed in a black UV resistant plastic. Supplied with a template to ensure that the lens cut out is positioned correctly.
The original bezel can be trimmed down with ease to fit around the duct if required. For final installation, it is recommended to use an adhesive sealant like Sikaflex to bond the duct into position and to reseal the headlight on both the front and back faces.
All prices include VAT.
3D Printed headlight duct for the Pre-Facelift BMW E46.
This headlight duct gives a direct cold air feed into the engine bay making it an ideal source of cold air for an intake system and is printed in a black UV resistant plastic. Supplied with a template to ensure that the lens cut out is positioned correctly.
The original bezel can be trimmed down with ease to fit around the duct if required. For final installation, it is recommended to use an adhesive sealant like Sikaflex to bond the duct into position and to reseal the headlight on both the front and back faces.
All prices include VAT.
3D Printed headlight duct for the Pre-Facelift BMW E46.
This headlight duct gives a direct cold air feed into the engine bay making it an ideal source of cold air for an intake system and is printed in a black UV resistant plastic. Supplied with a template to ensure that the lens cut out is positioned correctly.
The original bezel can be trimmed down with ease to fit around the duct if required. For final installation, it is recommended to use an adhesive sealant like Sikaflex to bond the duct into position and to reseal the headlight on both the front and back faces.
All prices include VAT.
